Compact and Capable!
\nThe new XR8 Pro G3 ESC is 1.3mm shorter, and 5.3mm narrower compared to its predecessor. The overall footprint is reduced by approximately 15%. The all-new fully sensored XR8 PRO G3 ESC meets the needs of high-end 8th scale racing applications with its strong explosive power, ultra large output power(200a), while having excellent low-speed linearity.
\n
\nA maximum output current of as high as 200A
\n
\nDual brake mode
\nThe innovative closed-loop torque brake control mode is also known as the disc brake mode. It completely solves the problem of non-linear force caused by the influence of vehicle speed on traditional braking methods.
\nIt enables linear output of braking force accurately, similar to the effect of real car disc brakes. The disc brake mode supports the adjustment of the curvature of the braking force and force distribution of the front and rear sections of the brakes. At the same time, the traditional braking mode is retained to take into account the driver's control habits.
\n
\nExcellent hardware design combined with innovative smart freewheeling technology enables the ESC to have higher drive efficiency and lower operating temperature. Compared with the XR8 Pro G2, the maximum temperature is reduced by approximately 15°C, and the ESC is stable and reliable.
\n
\nUnder heavy load conditions, the temperature of XR8 Pro G3 is lower than the XR8 Pro G2.
\n
\nCompared with the XR8 Pro G2, the maximum temperature is reduced by approximately 15degC.
\n
\nFrameless fan, efficient and durable.
\nThe frameless fan blade is designed with the use of specially formulated material to reduce the defective rate of the fan caused by impact from small stones, sand and other foreign objects.
\n
\nIntelligent fan start/stop, noise reduction and power saving The fan of the ESC does not work when the temperature is low. The fan will automatically turn on when the temperature rises to the pre-set value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.
\n
\nAdvanced Boost & Turbo Timing Technology.
\nThe XR8 Pro G3 ESC performs the best when it is paired with the recommended HOBBYWING motor. It inherits the same Turbo Timing technology used on the XR10 Pro series used in 1/10th On-Road and Off-Road competition.This ESC is able to support up to 48 degrees of Boost and Turbo Timing. There is a 50% increase in performance and is only recommended to pair with the new HOBBYWING 4268/4274 G3 motors.
\n
\nBuilt-in reverse polarityprotection circuit, reinforced protection.
\nThe ESC is reverse polarity protected. In an event when a user makes a mistake by reversing the polarity, the ESC will not be broken.
\n
\nReal-time data recording function.
\nEasy to obtain power running status. After connecting the OTA module box, turn on real-time data recording function to access the operating status.
\n
\nCapacitor Thermal Protection.
\nCapacitor thermal protection is designed and implemented into the ESC and will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload.
\nNote: If the overheating protection of the ESC is off, and it is used on a flat road vehicle, please add a capacitor pack, otherwise the capacitor may be overheated and damaged!
\n
\nSuperior Dustproof Protection The ESC is IP5X rated.
\nIt has a superior dustproof protection to protect the ESC in all types of environments. In addition, the ESC is equipped with a small protective cover for better fan protection.
\n
\nCustom ultra-soft 11AWG silicone wire.
\nThe ultra-soft 11AWG silicone wire is specially chosen for this product. The wire is ultra-flexible and low in resistance, making it the perfect combination to for your electronics.
\n
\nSpecifications
\n
\nScale - 1/8th
\nBrushed/Brushless - BL
\nSensored/Sensorless/ - SD
\nWaterproof - No
\n
\nCont./Peak Current - 200A/1080A
\n
\nInput
\n
\n2-4S LiPo
\n
\nBEC Output
\n
\nSwitch Mode:6V/7.4V Adjustable, Continuous Current: 6A(Switch-mode)
\n
\nWires & Connectors
\n
\nInput Wires - Black-11AWG-200MM*2
\nOutput Wires - Black-11AWG-200MM*3
\nInput Connectors - No
\nOutput Connecotors - No
\n
\nESC Programing via
\n
\nSET Button on ESC - Not Supported
\nLED Program Box - Not Supported
\nLCD G2 Program Box - Supported
\nOTA Programmer - Supported
\nProgramming Port - Independent programming port
\n
\nFirmware
\n
\nFirmware Upgrade - Supported
\n
\nSize & Weight
\n
\nSize - 54.8X36.8X38.8mm
\nWeight - 102.8g
\n
\nApplications
\n
\nMotors - 4268 3660 size motor
\n
\nVehicles
\n
\n1/8thOff-road,On-road Racing & 1/10th Short course truck,Monster truck
\n
\n